Here you can check and analyze the firmware file for the washing machines of the production "Indesit Co" (Indesit, Ariston etc.), Candy Group(Candy, Hoover etc.).
Upload your file using the form below, and after a few seconds the program will give you an analysis of your firmware!
Note. Currently available for analysis a firmware: EVOI, EVOI Display, EVOII, as well as washing machines CandyGroup of electronic modules MDL and Invensys.
All files must not be archived, file size in bytes may be:
For washing mashines of Indesit Company production:
2048 or 2200 if *.e2p - EVOI, detached the EEPROM 93C86 chip, error statistics, checksum;
8192 or 8344, if *.e2p - EVOII, detached the EEPROM 24C64 chip, error statistics, checksum, reset zone of variables.
For washing mashines of Candy Group production:
512 or 664, if *.e2p - MDL, detached the EEPROM 24C04 chip, error statistics, checksum, reset zone of variables;
256 or 408, if *.e2p - INVENSYS detached the EEPROM 24C02 chip, only error statistics;
2048 or 2200, if *.e2p - INVENSYS only with internal EEPROM Atmega644 (beveled module), only error statistics.
File extension does not matter - it could be the DAT extension or BIN or EEP or any other, most importantly, that should correspond to the length of the file and the firmware was not packed in the archive.
For more information I recommend reading this webpage.
If the firmware has been saved into the »swap bytes» format (usually a file extension .eep, but not always), the program automatically will detect it is and will transform into the needed form. Attention! Introducing the new generation of software. The Sky Prog Programmer for working with PCB Indesit ARCADIA/EVOII and Candy MDL/INVENSYS. The program can read and write firmware, perform analysis, set control bytes after programming the Candy INVENSYS board. To work with ARCADIA board, you do not need the company key Indesit (MERLONI). Which distinguishes the project from all others. The Sky Prog Programmer app has built-in EEPROM databases. More...
Checked
firmware
If you notice an errors, please report it to the author of the project on the E-MAIL: admin@eeprus.ru.
Здравствуйте! Ищу прошивку для СМА Indesit WIUN81 CSI S/N 208131082*24535250800. Ваш сервис выдает 2 прошивки, подскажите, подходят ли они для данной СМА? Если нет, прошу помочь с поиском подходящей.
День добрый ... При проверке прошивки для Candy, пишет, что я нарушил правила и создал более одного аккаунта ... Даже не понимаю как это и что значит ... До этого пытался её проверить, без авторизации на сайте ...
Вам отказано в доступе из-за нарушения правил сайта, Вами было создано более одного профиля (см. правила). Если Вы считаете, что это ошибка либо у Вас были уважительные причины либо Вам нужно пользоваться программой больше, чем существующие ограничения, пожалуйста, обратитесь к администратору сайта.